SRX100077 A03292-1 SRP012000 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS266084 A03292 WGS GENOMIC RANDOM 202 0 Application Read Forward 1 1 Application Read Reverse 102 Illumina HiSeq 2000 1 NIL Bustard 1.8.0 2 1 Bustard 1.8.0 SRX100078 A03293-1 SRP012000 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS266083 A03293 WGS GENOMIC RANDOM 202 0 Application Read Forward 1 1 Application Read Reverse 102 Illumina HiSeq 2000 1 NIL Illumina RTA 1.7.48.0 2 1 Illumina RTA 1.7.48.0 SRX100079 A03587-1 SRP011998 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS118029 A03587 WGS GENOMIC RANDOM 202 0 Application Read Forward 1 1 Application Read Reverse 102 Illumina HiSeq 2000 1 NIL Illumina RTA 1.7.48.0 2 1 Illumina RTA 1.7.48.0 SRX100080 A03588-1 SRP011998 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS118030 A03588 WGS GENOMIC RANDOM 202 0 Application Read Forward 1 1 Application Read Reverse 102 Illumina HiSeq 2000 1 NIL Illumina RTA 1.7.48.0 2 1 Illumina RTA 1.7.48.0 SRX100081 A04159-1 SRP012006 phs000471 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS118125 A04159 WGS GENOMIC RANDOM 202 0 Application Read Forward 1 1 Application Read Reverse 102 Illumina HiSeq 2000 1 NIL Illumina RTA 1.7.48.0 2 1 Illumina RTA 1.7.48.0 SRX100082 A04160-1 SRP012006 phs000471 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS118126 A04160 WGS GENOMIC RANDOM 202 0 Application Read Forward 1 1 Application Read Reverse 102 Illumina HiSeq 2000 1 NIL Illumina RTA 1.7.48.0 2 1 Illumina RTA 1.7.48.0 SRX100083 A04924-1 SRP012003 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS118120 A04924 WGS GENOMIC RANDOM 209 0 Application Read Forward 1 1 Technical Read BarCode 102 2 Application Read Reverse 109 Illumina HiSeq 2000 1 NIL Illumina RTA 1.10.36.0 2 1 Illumina RTA 1.10.36.0 SRX100084 A04925-1 SRP012003 Genomic DNA for construction of whole genome shotgun sequencing (WGSS) libraries was prepared from the same biopsy material using the Qiagen AllPrep DNA/RNA Mini Kit (Qiagen, Valencia, CA, USA). DNA quality was assessed by spectrophotometry (260/280 and 260/230) and gel electrophoresis before library construction. Depending on the availability of DNA, between 2 and 10ug was used in WGSS library construction. Briefly, DNA was sheared for 10 min using a Sonic Dismembrator 550 with a power setting of "7" in pulses of 30 seconds interspersed with 30 seconds of cooling (Cup Horn, Fisher Scientific, Ottawa, Ontario, Canada), and analyzed on 8% PAGE gels. The 200-300bp DNA fraction was excised and eluted from the gel slice overnight at 4 degrees Celsius in 300 ul of elution buffer (5:1, LoTE buffer (3 mM Tris-HCl, pH 7.5, 0.2 mM EDTA)-7.5 M ammonium acetate), and was purified using a Spin-X Filter Tube (Fisher Scientific), and by ethanol precipitation. WGSS libraries were prepared using a modified paired-end protocol supplied by Illumina Inc. (Illumina, Hayward, USA). This involved DNA end-repair and formation of 3' A overhangs using Klenow fragment (3' to 5' exo minus) and ligation to Illumina PE adapters (with 5' overhangs). Adapter-ligated products were purified on Qiaquick spin columns (Qiagen, Valencia, CA, USA) and PCR-amplified using Phusion DNA polymerase (NEB, Ipswich, MA, USA) and 10 cycles with the PE primer 1.0 and 2.0 (Illumina). PCR products of the desired size range were purified from adapter ligation artifacts using 8% PAGE gels. DNA quality was assessed and quantified using an Agilent DNA 1000 series II assay (Agilent, Santa Clara CA, USA) and Nanodrop 7500 spectrophotometer (Nanodrop, Wilmington, DE, USA) and DNA was subsequently diluted to 10nM. The final concentration was confirmed using a Quant-iT dsDNA HS assay kit and Qubit fluorometer (Invitrogen, Carlsbad, CA, USA). SRS118119 A04925 WGS GENOMIC RANDOM 209 0 Application Read Forward 1 1 Technical Read BarCode 102 2 Application Read Reverse 109 Illumina HiSeq 2000 1 NIL Illumina RTA 1.10.36.0 2 1 Illumina RTA 1.10.36.0