SRX23223715 GSM8017711_r1 SRP483818 PRJNA1064964 SRS20146925 GSM8017711 GSM8017711 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223716 GSM8017712_r1 SRP483818 PRJNA1064964 SRS20146926 GSM8017712 GSM8017712 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223717 GSM8017713_r1 SRP483818 PRJNA1064964 SRS20146927 GSM8017713 GSM8017713 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223718 GSM8017714_r1 SRP483818 PRJNA1064964 SRS20146928 GSM8017714 GSM8017714 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223719 GSM8017715_r1 SRP483818 PRJNA1064964 SRS20146929 GSM8017715 GSM8017715 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223720 GSM8017716_r1 SRP483818 PRJNA1064964 SRS20146930 GSM8017716 GSM8017716 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223721 GSM8017717_r1 SRP483818 PRJNA1064964 SRS20146931 GSM8017717 GSM8017717 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223722 GSM8017718_r1 SRP483818 PRJNA1064964 SRS20146932 GSM8017718 GSM8017718 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223723 GSM8017719_r1 SRP483818 PRJNA1064964 SRS20146933 GSM8017719 GSM8017719 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223724 GSM8017720_r1 SRP483818 PRJNA1064964 SRS20146934 GSM8017720 GSM8017720 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223725 GSM8017721_r1 SRP483818 PRJNA1064964 SRS20146935 GSM8017721 GSM8017721 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223726 GSM8017722_r1 SRP483818 PRJNA1064964 SRS20146936 GSM8017722 GSM8017722 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223727 GSM8017723_r1 SRP483818 PRJNA1064964 SRS20146937 GSM8017723 GSM8017723 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223728 GSM8017724_r1 SRP483818 PRJNA1064964 SRS20146938 GSM8017724 GSM8017724 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223729 GSM8017725_r1 SRP483818 PRJNA1064964 SRS20146939 GSM8017725 GSM8017725 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223730 GSM8017726_r1 SRP483818 PRJNA1064964 SRS20146940 GSM8017726 GSM8017726 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223731 GSM8017727_r1 SRP483818 PRJNA1064964 SRS20146941 GSM8017727 GSM8017727 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000 SRX23223732 GSM8017728_r1 SRP483818 PRJNA1064964 SRS20146942 GSM8017728 GSM8017728 RNA-Seq TRANSCRIPTOMIC cDNA Total RNA was extracted using Trizol reagent (Invitrogen, CA, USA) following the manufacturer's procedure. The total RNA quantity and purity were analysis of Bioanalyzer 2100 and RNA 6000 Nano LabChip Kit (Agilent, CA, USA) with RIN number >7.0. Approximately 10 ug of total RNA representing a specific adipose type was subjected to isolate Poly (A) mRNA with poly-T oligoattached magnetic beads (Invitrogen). Following purification, the poly(A)- or poly(A)+ RNA fractions is fragmented into small pieces using divalent cations under elevated temperature. Then the cleaved RNA fragments were reverse-transcribed to create the final cDNA library in accordance with the protocol for the mRNA-Seq sample preparation kit (Illumina, San Diego, USA), the average insert size for the paired-end libraries was 300 bp (±50 bp). And then we performed the paired-end sequencing on an Illumina Novaseq™ 6000 at the (lc-bio, China) following the vendor's recommended protocol. RNA libraries were prepared for sequencing using standard Illumina protocols Illumina NovaSeq 6000