SRX764384 GSM1551046 SRP050075 SRS748745 GSM1551046 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 GEO Sample GSM1551046 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1551046 gds 301551046 GEO Accession GSM1551046 SRX764385 GSM1551047 SRP050075 SRS748746 GSM1551047 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 GEO Sample GSM1551047 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1551047 gds 301551047 GEO Accession GSM1551047 SRX764386 GSM1551048 SRP050075 SRS748747 GSM1551048 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 GEO Sample GSM1551048 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1551048 gds 301551048 GEO Accession GSM1551048 SRX764387 GSM1551049 SRP050075 SRS748748 GSM1551049 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 GEO Sample GSM1551049 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1551049 gds 301551049 GEO Accession GSM1551049 SRX764388 GSM1551050 SRP050075 SRS748749 GSM1551050 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 GEO Sample GSM1551050 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1551050 gds 301551050 GEO Accession GSM1551050 SRX764389 GSM1551051 SRP050075 SRS748750 GSM1551051 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 GEO Sample GSM1551051 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1551051 gds 301551051 GEO Accession GSM1551051 SRX1258040 GSM1888176 SRP050075 SRS1073658 GSM1888176 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 gds 301888176 GEO Accession GSM1888176 SRX1258041 GSM1888177 SRP050075 SRS1073657 GSM1888177 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 gds 301888177 GEO Accession GSM1888177 SRX1258042 GSM1888178 SRP050075 SRS1073656 GSM1888178 ChIP-Seq GENOMIC ChIP Cells were fixed with 1% formaldehyde for 15 min and quenched with 0.125 M glycine. Chromatin was isolated by the addition of lysis buffer, followed by disruption with a Dounce homogenizer. Lysates were sonicated and the DNA sheared to an average length of 300-500 bp. Genomic DNA (Input) was prepared by treating aliquots of chromatin with RNase, proteinase K and heat for de-crosslinking, followed by ethanol precipitation. Pellets were resuspended and the resulting DNA was quantified on a NanoDrop spectrophotometer. For each ChIP reaction, 30 ug of chromatin was precleared with protein A agarose beads (Invitrogen). ChIP reactions were set up using precleared chromatin and antibodies and incubated overnight at 4 C. Protein A agarose beads were added and incubation at 4 C was continued for another 3 hr. Immune complexes were washed, eluted from the beads with SDS buffer, and subjected to RNase and proteinase K treatment. Crosslinks were reversed by incubation overnight at 65 C, and ChIP DNA was purified by phenol-chloroform extraction and ethanol precipitation. Illumina sequencing libraries were prepared from the ChIP and Input DNAs by the standard consecutive enzymatic steps of end-polishing, dA-addition, and adaptor ligation. After a final PCR amplification step, the resulting DNA libraries were quantified and sequenced on HiSeq 2500 (50 nt reads, single end). Illumina HiSeq 2500 gds 301888178 GEO Accession GSM1888178