SRX825364 GSM1574235 SRP051604 SRS804907 GSM1574235 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574235 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574235 gds 301574235 GEO Accession GSM1574235 SRX825365 GSM1574236 SRP051604 SRS804908 GSM1574236 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574236 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574236 gds 301574236 GEO Accession GSM1574236 SRX825366 GSM1574237 SRP051604 SRS804909 GSM1574237 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574237 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574237 gds 301574237 GEO Accession GSM1574237 SRX825367 GSM1574238 SRP051604 SRS804910 GSM1574238 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574238 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574238 gds 301574238 GEO Accession GSM1574238 SRX825368 GSM1574239 SRP051604 SRS804911 GSM1574239 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574239 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574239 gds 301574239 GEO Accession GSM1574239 SRX825369 GSM1574240 SRP051604 SRS804912 GSM1574240 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574240 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574240 gds 301574240 GEO Accession GSM1574240 SRX825370 GSM1574241 SRP051604 SRS804913 GSM1574241 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574241 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574241 gds 301574241 GEO Accession GSM1574241 SRX825371 GSM1574242 SRP051604 SRS804914 GSM1574242 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574242 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574242 gds 301574242 GEO Accession GSM1574242 SRX825372 GSM1574243 SRP051604 SRS804915 GSM1574243 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574243 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574243 gds 301574243 GEO Accession GSM1574243 SRX825373 GSM1574245 SRP051604 SRS804916 GSM1574245 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574245 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574245 gds 301574245 GEO Accession GSM1574245 SRX825374 GSM1574248 SRP051604 SRS804917 GSM1574248 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574248 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574248 gds 301574248 GEO Accession GSM1574248 SRX825375 GSM1574250 SRP051604 SRS804918 GSM1574250 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574250 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574250 gds 301574250 GEO Accession GSM1574250 SRX825376 GSM1574252 SRP051604 SRS804919 GSM1574252 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574252 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574252 gds 301574252 GEO Accession GSM1574252 SRX825377 GSM1574254 SRP051604 SRS804920 GSM1574254 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574254 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574254 gds 301574254 GEO Accession GSM1574254 SRX825378 GSM1574256 SRP051604 SRS804921 GSM1574256 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574256 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574256 gds 301574256 GEO Accession GSM1574256 SRX825379 GSM1574258 SRP051604 SRS804922 GSM1574258 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574258 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574258 gds 301574258 GEO Accession GSM1574258 SRX825380 GSM1574259 SRP051604 SRS804923 GSM1574259 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574259 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574259 gds 301574259 GEO Accession GSM1574259 SRX825381 GSM1574260 SRP051604 SRS804924 GSM1574260 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574260 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574260 gds 301574260 GEO Accession GSM1574260 SRX825382 GSM1574261 SRP051604 SRS804925 GSM1574261 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574261 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574261 gds 301574261 GEO Accession GSM1574261 SRX825383 GSM1574262 SRP051604 SRS804926 GSM1574262 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574262 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574262 gds 301574262 GEO Accession GSM1574262 SRX825384 GSM1574263 SRP051604 SRS804927 GSM1574263 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574263 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574263 gds 301574263 GEO Accession GSM1574263 SRX825385 GSM1574264 SRP051604 SRS804928 GSM1574264 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574264 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574264 gds 301574264 GEO Accession GSM1574264 SRX825386 GSM1574265 SRP051604 SRS804929 GSM1574265 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574265 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574265 gds 301574265 GEO Accession GSM1574265 SRX825387 GSM1574266 SRP051604 SRS804930 GSM1574266 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574266 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574266 gds 301574266 GEO Accession GSM1574266 SRX825388 GSM1574267 SRP051604 SRS804931 GSM1574267 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574267 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574267 gds 301574267 GEO Accession GSM1574267 SRX825389 GSM1574268 SRP051604 SRS804932 GSM1574268 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574268 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574268 gds 301574268 GEO Accession GSM1574268 SRX825390 GSM1574269 SRP051604 SRS804933 GSM1574269 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574269 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574269 gds 301574269 GEO Accession GSM1574269 SRX825391 GSM1574270 SRP051604 SRS804934 GSM1574270 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574270 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574270 gds 301574270 GEO Accession GSM1574270 SRX825392 GSM1574271 SRP051604 SRS804935 GSM1574271 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574271 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574271 gds 301574271 GEO Accession GSM1574271 SRX825393 GSM1574272 SRP051604 SRS804936 GSM1574272 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574272 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574272 gds 301574272 GEO Accession GSM1574272 SRX825394 GSM1574273 SRP051604 SRS804937 GSM1574273 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574273 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574273 gds 301574273 GEO Accession GSM1574273 SRX825395 GSM1574274 SRP051604 SRS804938 GSM1574274 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574274 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574274 gds 301574274 GEO Accession GSM1574274 SRX825396 GSM1574275 SRP051604 SRS804939 GSM1574275 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574275 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574275 gds 301574275 GEO Accession GSM1574275 SRX825397 GSM1574276 SRP051604 SRS804940 GSM1574276 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574276 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574276 gds 301574276 GEO Accession GSM1574276 SRX825398 GSM1574277 SRP051604 SRS804941 GSM1574277 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574277 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574277 gds 301574277 GEO Accession GSM1574277 SRX825399 GSM1574278 SRP051604 SRS804942 GSM1574278 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574278 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574278 gds 301574278 GEO Accession GSM1574278 SRX825400 GSM1574279 SRP051604 SRS804943 GSM1574279 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574279 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574279 gds 301574279 GEO Accession GSM1574279 SRX825401 GSM1574280 SRP051604 SRS804945 GSM1574280 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574280 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574280 gds 301574280 GEO Accession GSM1574280 SRX825402 GSM1574281 SRP051604 SRS804944 GSM1574281 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574281 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574281 gds 301574281 GEO Accession GSM1574281 SRX825403 GSM1574282 SRP051604 SRS804946 GSM1574282 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574282 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574282 gds 301574282 GEO Accession GSM1574282 SRX825404 GSM1574283 SRP051604 SRS804947 GSM1574283 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574283 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574283 gds 301574283 GEO Accession GSM1574283 SRX825405 GSM1574284 SRP051604 SRS804949 GSM1574284 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574284 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574284 gds 301574284 GEO Accession GSM1574284 SRX825406 GSM1574285 SRP051604 SRS804948 GSM1574285 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574285 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574285 gds 301574285 GEO Accession GSM1574285 SRX825407 GSM1574286 SRP051604 SRS804951 GSM1574286 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574286 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574286 gds 301574286 GEO Accession GSM1574286 SRX825408 GSM1574287 SRP051604 SRS804950 GSM1574287 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574287 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574287 gds 301574287 GEO Accession GSM1574287 SRX825409 GSM1574288 SRP051604 SRS804952 GSM1574288 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574288 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574288 gds 301574288 GEO Accession GSM1574288 SRX825410 GSM1574289 SRP051604 SRS804953 GSM1574289 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574289 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574289 gds 301574289 GEO Accession GSM1574289 SRX825411 GSM1574290 SRP051604 SRS804954 GSM1574290 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574290 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574290 gds 301574290 GEO Accession GSM1574290 SRX825412 GSM1574291 SRP051604 SRS804955 GSM1574291 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574291 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574291 gds 301574291 GEO Accession GSM1574291 SRX825413 GSM1574292 SRP051604 SRS804956 GSM1574292 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II GEO Sample GSM1574292 http://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSM1574292 gds 301574292 GEO Accession GSM1574292 SRX1389376 GSM1919982 SRP051604 SRS1136798 GSM1919982 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II gds 301919982 GEO Accession GSM1919982 SRX1389377 GSM1919983 SRP051604 SRS1136797 GSM1919983 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II gds 301919983 GEO Accession GSM1919983 SRX1389378 GSM1919984 SRP051604 SRS1136796 GSM1919984 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II gds 301919984 GEO Accession GSM1919984 SRX1389379 GSM1919985 SRP051604 SRS1136795 GSM1919985 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II gds 301919985 GEO Accession GSM1919985 SRX1389380 GSM1919986 SRP051604 SRS1136794 GSM1919986 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II gds 301919986 GEO Accession GSM1919986 SRX1389381 GSM1919987 SRP051604 SRS1136793 GSM1919987 ChIP-Seq GENOMIC ChIP ChIP lysates were generated from 2-5x10^6 cells for histone marks or 20-40x10^6 cells for transcription factors. Cells were fixed in 1% formaldehyde for 10min. Lysate was immunoprecipitated with 10ug of antibody. Antibodies were pre-bound overnight to 100ul of G protein-coupled paramagnetic beads in PBS/BSA 0.5%. Beads were then added to lysates (the preclearing step was omitted) and incubation was let to proceed overnight. Beads were washed 6 times in a modified RIPA buffer (50mM Hepes pH 7.6, 500mM LiCl, 1mM EDTA, 1% NP-40, 0.7% Na-deoxycholate) and once in TE containing 50mM NaCl. DNA was eluted in TE containing 2% SDS and crosslinks reversed by incubation overnight at 65ºC. DNA was then purified by QIAquick columns (Qiagen) and quantified using PicoGreen (Invitrogen). ChIP DNA was prepared for HiSeq 2000 Illumina sequencing using a standard protocol consisting in blunting, addition of dA overhangs, ligation of Illumina adapters, PCR with index primers and purification. A mixture of T4 DNA polymerase, DNA polymerase I and T4 kinase was used according to manufacturer’s instruction. Library preparation is carried out on SPRIworks Fragment Library System. Illumina Genome Analyzer II gds 301919987 GEO Accession GSM1919987