<?xml version="1.0" encoding="UTF-8"?>
<EXPERIMENT_SET xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <EXPERIMENT alias="GSM2877032" accession="SRX3445722">
    <IDENTIFIERS>
      <PRIMARY_ID>SRX3445722</PRIMARY_ID>
      <SUBMITTER_ID namespace="GEO">GSM2877032</SUBMITTER_ID>
    </IDENTIFIERS>
    <TITLE>GSM2877032: ZNF341_ChIPSeq_1; Homo sapiens; ChIP-Seq</TITLE>
    <STUDY_REF accession="SRP126187" refname="GSE107719">
      <IDENTIFIERS>
        <PRIMARY_ID>SRP126187</PRIMARY_ID>
      </IDENTIFIERS>
    </STUDY_REF>
    <DESIGN>
      <DESIGN_DESCRIPTION/>
      <SAMPLE_DESCRIPTOR accession="SRS2736122">
        <IDENTIFIERS>
          <PRIMARY_ID>SRS2736122</PRIMARY_ID>
          <EXTERNAL_ID namespace="GEO">GSM2877032</EXTERNAL_ID>
        </IDENTIFIERS>
      </SAMPLE_DESCRIPTOR>
      <LIBRARY_DESCRIPTOR>
        <LIBRARY_STRATEGY>ChIP-Seq</LIBRARY_STRATEGY>
        <LIBRARY_SOURCE>GENOMIC</LIBRARY_SOURCE>
        <LIBRARY_SELECTION>ChIP</LIBRARY_SELECTION>
        <LIBRARY_LAYOUT>
          <SINGLE/>
        </LIBRARY_LAYOUT>
        <LIBRARY_CONSTRUCTION_PROTOCOL>Cells were fixed for 15 minutes in 1% formaldehyde in PBS with 2% FCS. Formaldehyde was quenched for 10 minutes with 0.2M glycine. Cells were washed 2 times with ice-cold PBS. 30µl Protein G Dynabeads (Life Technologies) were blocked with 0.5% BSA (w/v) in PBS. Magnetic beads were bound with 5µg of anti-ZNF341 antibody. Crosslinked cells were lysed in lysis buffer (0.5% NP-40, 10mM HEPES, 85mM KCl, 4ul EDTA). After centrifugation, nuclei were resuspended and sonicated in sonication buffer (50mM Tris-HCl pH8.0, 1% SDS, 10mM EDTA) for 5 cycles at 10 sec each on ice (20W) with 50 sec on ice between cycles. Lysates were cleared by centrifugation and Triton X-100 was added at a final concentration of 1%. Lysates were then incubated overnight at 4°C with the previously prepared magnetic beads. Beads were washed once with RIPA (50mM Tris-HCl pH8.0, 150mM NaCl, 0.1% SDS, 0.1% Na-Deoxycholate, 1% Triton X-100, 1mM EDTA), once with RIPA 500 (50mM Tris-HCl pH8.0, 500mM NaCl, 0.1% SDS, 0.1% Na-Deoxycholate, 1% Triton X-100, 1mM EDTA), once with LiCl wash (10mM Tris-HCl pH8.0, 250mM LiCl, 0.5% NP-40, 0.5% Na-deoxycholate, 1mM EDTA) and finally twice with TE (10mM Tris pH8.0, 1mM EDTA). Bound complexes were eluted from the beads in elution buffer (10mM Tris-HCl pH8.0, 0.5% SDS, 300mM NaCl, 5mM EDTA) for 30 min at 65 °C with shaking. Crosslinks were reversed overnight at 65°C. RNA and protein were digested in the supernatant using RNase A and Proteinase K. DNA was purified using ChIP DNA clean and concentrator columns (Zymoresearch). Libraries were prepared according to Illumina's instructions. Briefly, DNA was end-repaired using a combination of T4 DNA polymerase, E. coli DNA Pol I large fragment (Klenow polymerase) and T4 polynucleotide kinase. The blunt, phosphorylated ends were treated with Klenow fragment (minus exo) and dATP to yield a protruding 3- 'A' base for ligation of Illumina's adapters which have a single 'T' base overhang at the 3' end. After adapter ligation, ChIP DNA was PCR-amplified with Illumina primers with the respective indexes for 18 cycles and library fragments (ChIP) (insert plus adaptor and PCR primer sequences) were size- selected with AMPure XP beads (Beckman Coulter).</LIBRARY_CONSTRUCTION_PROTOCOL>
      </LIBRARY_DESCRIPTOR>
    </DESIGN>
    <PLATFORM>
      <ILLUMINA>
        <INSTRUMENT_MODEL>Illumina HiSeq 2000</INSTRUMENT_MODEL>
      </ILLUMINA>
    </PLATFORM>
    <EXPERIMENT_LINKS>
      <EXPERIMENT_LINK>
        <XREF_LINK>
          <DB>gds</DB>
          <ID>302877032</ID>
          <LABEL>GSM2877032</LABEL>
        </XREF_LINK>
      </EXPERIMENT_LINK>
    </EXPERIMENT_LINKS>
    <EXPERIMENT_ATTRIBUTES>
      <EXPERIMENT_ATTRIBUTE>
        <TAG>GEO Accession</TAG>
        <VALUE>GSM2877032</VALUE>
      </EXPERIMENT_ATTRIBUTE>
    </EXPERIMENT_ATTRIBUTES>
  </EXPERIMENT>
  <EXPERIMENT alias="GSM2877033" accession="SRX3445723">
    <IDENTIFIERS>
      <PRIMARY_ID>SRX3445723</PRIMARY_ID>
      <SUBMITTER_ID namespace="GEO">GSM2877033</SUBMITTER_ID>
    </IDENTIFIERS>
    <TITLE>GSM2877033: ZNF341_ChIPSeq_2; Homo sapiens; ChIP-Seq</TITLE>
    <STUDY_REF accession="SRP126187" refname="GSE107719">
      <IDENTIFIERS>
        <PRIMARY_ID>SRP126187</PRIMARY_ID>
      </IDENTIFIERS>
    </STUDY_REF>
    <DESIGN>
      <DESIGN_DESCRIPTION/>
      <SAMPLE_DESCRIPTOR accession="SRS2736123">
        <IDENTIFIERS>
          <PRIMARY_ID>SRS2736123</PRIMARY_ID>
          <EXTERNAL_ID namespace="GEO">GSM2877033</EXTERNAL_ID>
        </IDENTIFIERS>
      </SAMPLE_DESCRIPTOR>
      <LIBRARY_DESCRIPTOR>
        <LIBRARY_STRATEGY>ChIP-Seq</LIBRARY_STRATEGY>
        <LIBRARY_SOURCE>GENOMIC</LIBRARY_SOURCE>
        <LIBRARY_SELECTION>ChIP</LIBRARY_SELECTION>
        <LIBRARY_LAYOUT>
          <SINGLE/>
        </LIBRARY_LAYOUT>
        <LIBRARY_CONSTRUCTION_PROTOCOL>Cells were fixed for 15 minutes in 1% formaldehyde in PBS with 2% FCS. Formaldehyde was quenched for 10 minutes with 0.2M glycine. Cells were washed 2 times with ice-cold PBS. 30µl Protein G Dynabeads (Life Technologies) were blocked with 0.5% BSA (w/v) in PBS. Magnetic beads were bound with 5µg of anti-ZNF341 antibody. Crosslinked cells were lysed in lysis buffer (0.5% NP-40, 10mM HEPES, 85mM KCl, 4ul EDTA). After centrifugation, nuclei were resuspended and sonicated in sonication buffer (50mM Tris-HCl pH8.0, 1% SDS, 10mM EDTA) for 5 cycles at 10 sec each on ice (20W) with 50 sec on ice between cycles. Lysates were cleared by centrifugation and Triton X-100 was added at a final concentration of 1%. Lysates were then incubated overnight at 4°C with the previously prepared magnetic beads. Beads were washed once with RIPA (50mM Tris-HCl pH8.0, 150mM NaCl, 0.1% SDS, 0.1% Na-Deoxycholate, 1% Triton X-100, 1mM EDTA), once with RIPA 500 (50mM Tris-HCl pH8.0, 500mM NaCl, 0.1% SDS, 0.1% Na-Deoxycholate, 1% Triton X-100, 1mM EDTA), once with LiCl wash (10mM Tris-HCl pH8.0, 250mM LiCl, 0.5% NP-40, 0.5% Na-deoxycholate, 1mM EDTA) and finally twice with TE (10mM Tris pH8.0, 1mM EDTA). Bound complexes were eluted from the beads in elution buffer (10mM Tris-HCl pH8.0, 0.5% SDS, 300mM NaCl, 5mM EDTA) for 30 min at 65 °C with shaking. Crosslinks were reversed overnight at 65°C. RNA and protein were digested in the supernatant using RNase A and Proteinase K. DNA was purified using ChIP DNA clean and concentrator columns (Zymoresearch). Libraries were prepared according to Illumina's instructions. Briefly, DNA was end-repaired using a combination of T4 DNA polymerase, E. coli DNA Pol I large fragment (Klenow polymerase) and T4 polynucleotide kinase. The blunt, phosphorylated ends were treated with Klenow fragment (minus exo) and dATP to yield a protruding 3- 'A' base for ligation of Illumina's adapters which have a single 'T' base overhang at the 3' end. After adapter ligation, ChIP DNA was PCR-amplified with Illumina primers with the respective indexes for 18 cycles and library fragments (ChIP) (insert plus adaptor and PCR primer sequences) were size- selected with AMPure XP beads (Beckman Coulter).</LIBRARY_CONSTRUCTION_PROTOCOL>
      </LIBRARY_DESCRIPTOR>
    </DESIGN>
    <PLATFORM>
      <ILLUMINA>
        <INSTRUMENT_MODEL>Illumina HiSeq 2000</INSTRUMENT_MODEL>
      </ILLUMINA>
    </PLATFORM>
    <EXPERIMENT_LINKS>
      <EXPERIMENT_LINK>
        <XREF_LINK>
          <DB>gds</DB>
          <ID>302877033</ID>
          <LABEL>GSM2877033</LABEL>
        </XREF_LINK>
      </EXPERIMENT_LINK>
    </EXPERIMENT_LINKS>
    <EXPERIMENT_ATTRIBUTES>
      <EXPERIMENT_ATTRIBUTE>
        <TAG>GEO Accession</TAG>
        <VALUE>GSM2877033</VALUE>
      </EXPERIMENT_ATTRIBUTE>
    </EXPERIMENT_ATTRIBUTES>
  </EXPERIMENT>
  <EXPERIMENT alias="GSM2877034" accession="SRX3445724">
    <IDENTIFIERS>
      <PRIMARY_ID>SRX3445724</PRIMARY_ID>
      <SUBMITTER_ID namespace="GEO">GSM2877034</SUBMITTER_ID>
    </IDENTIFIERS>
    <TITLE>GSM2877034: Input; Homo sapiens; ChIP-Seq</TITLE>
    <STUDY_REF accession="SRP126187" refname="GSE107719">
      <IDENTIFIERS>
        <PRIMARY_ID>SRP126187</PRIMARY_ID>
      </IDENTIFIERS>
    </STUDY_REF>
    <DESIGN>
      <DESIGN_DESCRIPTION/>
      <SAMPLE_DESCRIPTOR accession="SRS2736125">
        <IDENTIFIERS>
          <PRIMARY_ID>SRS2736125</PRIMARY_ID>
          <EXTERNAL_ID namespace="GEO">GSM2877034</EXTERNAL_ID>
        </IDENTIFIERS>
      </SAMPLE_DESCRIPTOR>
      <LIBRARY_DESCRIPTOR>
        <LIBRARY_STRATEGY>ChIP-Seq</LIBRARY_STRATEGY>
        <LIBRARY_SOURCE>GENOMIC</LIBRARY_SOURCE>
        <LIBRARY_SELECTION>ChIP</LIBRARY_SELECTION>
        <LIBRARY_LAYOUT>
          <SINGLE/>
        </LIBRARY_LAYOUT>
        <LIBRARY_CONSTRUCTION_PROTOCOL>Cells were fixed for 15 minutes in 1% formaldehyde in PBS with 2% FCS. Formaldehyde was quenched for 10 minutes with 0.2M glycine. Cells were washed 2 times with ice-cold PBS. 30µl Protein G Dynabeads (Life Technologies) were blocked with 0.5% BSA (w/v) in PBS. Magnetic beads were bound with 5µg of anti-ZNF341 antibody. Crosslinked cells were lysed in lysis buffer (0.5% NP-40, 10mM HEPES, 85mM KCl, 4ul EDTA). After centrifugation, nuclei were resuspended and sonicated in sonication buffer (50mM Tris-HCl pH8.0, 1% SDS, 10mM EDTA) for 5 cycles at 10 sec each on ice (20W) with 50 sec on ice between cycles. Lysates were cleared by centrifugation and Triton X-100 was added at a final concentration of 1%. Lysates were then incubated overnight at 4°C with the previously prepared magnetic beads. Beads were washed once with RIPA (50mM Tris-HCl pH8.0, 150mM NaCl, 0.1% SDS, 0.1% Na-Deoxycholate, 1% Triton X-100, 1mM EDTA), once with RIPA 500 (50mM Tris-HCl pH8.0, 500mM NaCl, 0.1% SDS, 0.1% Na-Deoxycholate, 1% Triton X-100, 1mM EDTA), once with LiCl wash (10mM Tris-HCl pH8.0, 250mM LiCl, 0.5% NP-40, 0.5% Na-deoxycholate, 1mM EDTA) and finally twice with TE (10mM Tris pH8.0, 1mM EDTA). Bound complexes were eluted from the beads in elution buffer (10mM Tris-HCl pH8.0, 0.5% SDS, 300mM NaCl, 5mM EDTA) for 30 min at 65 °C with shaking. Crosslinks were reversed overnight at 65°C. RNA and protein were digested in the supernatant using RNase A and Proteinase K. DNA was purified using ChIP DNA clean and concentrator columns (Zymoresearch). Libraries were prepared according to Illumina's instructions. Briefly, DNA was end-repaired using a combination of T4 DNA polymerase, E. coli DNA Pol I large fragment (Klenow polymerase) and T4 polynucleotide kinase. The blunt, phosphorylated ends were treated with Klenow fragment (minus exo) and dATP to yield a protruding 3- 'A' base for ligation of Illumina's adapters which have a single 'T' base overhang at the 3' end. After adapter ligation, ChIP DNA was PCR-amplified with Illumina primers with the respective indexes for 18 cycles and library fragments (ChIP) (insert plus adaptor and PCR primer sequences) were size- selected with AMPure XP beads (Beckman Coulter).</LIBRARY_CONSTRUCTION_PROTOCOL>
      </LIBRARY_DESCRIPTOR>
    </DESIGN>
    <PLATFORM>
      <ILLUMINA>
        <INSTRUMENT_MODEL>Illumina HiSeq 2000</INSTRUMENT_MODEL>
      </ILLUMINA>
    </PLATFORM>
    <EXPERIMENT_LINKS>
      <EXPERIMENT_LINK>
        <XREF_LINK>
          <DB>gds</DB>
          <ID>302877034</ID>
          <LABEL>GSM2877034</LABEL>
        </XREF_LINK>
      </EXPERIMENT_LINK>
    </EXPERIMENT_LINKS>
    <EXPERIMENT_ATTRIBUTES>
      <EXPERIMENT_ATTRIBUTE>
        <TAG>GEO Accession</TAG>
        <VALUE>GSM2877034</VALUE>
      </EXPERIMENT_ATTRIBUTE>
    </EXPERIMENT_ATTRIBUTES>
  </EXPERIMENT>
</EXPERIMENT_SET>
