<?xml version="1.0" encoding="UTF-8"?>
<EXPERIMENT_SET xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <EXPERIMENT accession="SRX5173627" alias="FLAG_2_IP">
    <IDENTIFIERS>
      <PRIMARY_ID>SRX5173627</PRIMARY_ID>
      <SUBMITTER_ID namespace="SUB4952489">FLAG_2_IP</SUBMITTER_ID>
    </IDENTIFIERS>
    <TITLE>DNA from FLAG-RocS pulldown, replicate 2</TITLE>
    <STUDY_REF accession="SRP174202">
      <IDENTIFIERS>
        <PRIMARY_ID>SRP174202</PRIMARY_ID>
        <SUBMITTER_ID namespace="SUB4952489">bp0</SUBMITTER_ID>
      </IDENTIFIERS>
    </STUDY_REF>
    <DESIGN>
      <DESIGN_DESCRIPTION>The protocol for immunoprecipitation of FLAG-tagged RocS was largely based on Minnen et al., Mol. Micro, 2011 and was performed in duplicate. Specifically, cells were pre-cultured in acid C+Y (pH 6.8) and grown until OD600 0.40. Cells were then diluted 1:50 in acid C+Y, to a final volume of 30 mL and grown until OD600 0.20. Fixation, formaldehyde quenching and harvesting was performed as described earlier. DynabeadsTM Protein G (Invitrogen) were prepared according to the manufacturers instructions and loaded with 10 ug of anti-FLAG antibody. Cell pellets were resuspended in 2 mL ice-cold lysis buffer and transferred to a 5 ml round-bottom tube. Samples were sonicated on ice for 5-10x 30 sec  on a Sonics Vibracell VCX130 with 65% amplitude. Samples were then split into 200 L whole-cell extract (WCE, stored at -20C) and 800 L for immunoprecipitation. Immunoprecipitation was performed as described before. WCE samples were thawed and combined with 300 L TES buffer and 20 L of 10% SDS. To elute DNA, both WCEs and immunoprecipitates (IPs) were incubated overnight on a shaker at 65C. On a magnet, the DNA-containing supernatant was transferred to a fresh tube.  DNA was purified by phenol-chloroform extraction, followed by ethanol precipitation.Further library preparation was performed by GATC Biotech. Due to an insufficient amount of material in one of the immunoprecipitation samples, we collected data on 2 WCE samples and 1 IP sample.</DESIGN_DESCRIPTION>
      <SAMPLE_DESCRIPTOR accession="SRS4181055">
        <IDENTIFIERS>
          <PRIMARY_ID>SRS4181055</PRIMARY_ID>
          <SUBMITTER_ID namespace="pda|jslager">FLAG-RocS</SUBMITTER_ID>
        </IDENTIFIERS>
      </SAMPLE_DESCRIPTOR>
      <LIBRARY_DESCRIPTOR>
        <LIBRARY_NAME>FLAG_2_IP</LIBRARY_NAME>
        <LIBRARY_STRATEGY>ChIP-Seq</LIBRARY_STRATEGY>
        <LIBRARY_SOURCE>GENOMIC</LIBRARY_SOURCE>
        <LIBRARY_SELECTION>ChIP</LIBRARY_SELECTION>
        <LIBRARY_LAYOUT>
          <SINGLE/>
        </LIBRARY_LAYOUT>
      </LIBRARY_DESCRIPTOR>
    </DESIGN>
    <PLATFORM>
      <ILLUMINA>
        <INSTRUMENT_MODEL>Illumina HiSeq 2500</INSTRUMENT_MODEL>
      </ILLUMINA>
    </PLATFORM>
  </EXPERIMENT>
  <EXPERIMENT accession="SRX5173628" alias="FLAG_2_WCE">
    <IDENTIFIERS>
      <PRIMARY_ID>SRX5173628</PRIMARY_ID>
      <SUBMITTER_ID namespace="SUB4952489">FLAG_2_WCE</SUBMITTER_ID>
    </IDENTIFIERS>
    <TITLE>DNA from FLAG-RocS whole-cell extract, replicate 2</TITLE>
    <STUDY_REF accession="SRP174202">
      <IDENTIFIERS>
        <PRIMARY_ID>SRP174202</PRIMARY_ID>
        <SUBMITTER_ID namespace="SUB4952489">bp0</SUBMITTER_ID>
      </IDENTIFIERS>
    </STUDY_REF>
    <DESIGN>
      <DESIGN_DESCRIPTION>The protocol for immunoprecipitation of FLAG-tagged RocS was largely based on Minnen et al., Mol. Micro, 2011 and was performed in duplicate. Specifically, cells were pre-cultured in acid C+Y (pH 6.8) and grown until OD600 0.40. Cells were then diluted 1:50 in acid C+Y, to a final volume of 30 mL and grown until OD600 0.20. Fixation, formaldehyde quenching and harvesting was performed as described earlier. DynabeadsTM Protein G (Invitrogen) were prepared according to the manufacturers instructions and loaded with 10 ug of anti-FLAG antibody. Cell pellets were resuspended in 2 mL ice-cold lysis buffer and transferred to a 5 ml round-bottom tube. Samples were sonicated on ice for 5-10x 30 sec  on a Sonics Vibracell VCX130 with 65% amplitude. Samples were then split into 200 L whole-cell extract (WCE, stored at -20C) and 800 L for immunoprecipitation. Immunoprecipitation was performed as described before. WCE samples were thawed and combined with 300 L TES buffer and 20 L of 10% SDS. To elute DNA, both WCEs and immunoprecipitates (IPs) were incubated overnight on a shaker at 65C. On a magnet, the DNA-containing supernatant was transferred to a fresh tube.  DNA was purified by phenol-chloroform extraction, followed by ethanol precipitation.Further library preparation was performed by GATC Biotech. Due to an insufficient amount of material in one of the immunoprecipitation samples, we collected data on 2 WCE samples and 1 IP sample.</DESIGN_DESCRIPTION>
      <SAMPLE_DESCRIPTOR accession="SRS4181055">
        <IDENTIFIERS>
          <PRIMARY_ID>SRS4181055</PRIMARY_ID>
          <SUBMITTER_ID namespace="pda|jslager">FLAG-RocS</SUBMITTER_ID>
        </IDENTIFIERS>
      </SAMPLE_DESCRIPTOR>
      <LIBRARY_DESCRIPTOR>
        <LIBRARY_NAME>FLAG_2_WCE</LIBRARY_NAME>
        <LIBRARY_STRATEGY>ChIP-Seq</LIBRARY_STRATEGY>
        <LIBRARY_SOURCE>GENOMIC</LIBRARY_SOURCE>
        <LIBRARY_SELECTION>size fractionation</LIBRARY_SELECTION>
        <LIBRARY_LAYOUT>
          <SINGLE/>
        </LIBRARY_LAYOUT>
      </LIBRARY_DESCRIPTOR>
    </DESIGN>
    <PLATFORM>
      <ILLUMINA>
        <INSTRUMENT_MODEL>Illumina HiSeq 2500</INSTRUMENT_MODEL>
      </ILLUMINA>
    </PLATFORM>
  </EXPERIMENT>
  <EXPERIMENT accession="SRX5173629" alias="FLAG_1_WCE">
    <IDENTIFIERS>
      <PRIMARY_ID>SRX5173629</PRIMARY_ID>
      <SUBMITTER_ID namespace="SUB4952489">FLAG_1_WCE</SUBMITTER_ID>
    </IDENTIFIERS>
    <TITLE>DNA from FLAG-RocS whole-cell extract, replicate 1</TITLE>
    <STUDY_REF accession="SRP174202">
      <IDENTIFIERS>
        <PRIMARY_ID>SRP174202</PRIMARY_ID>
        <SUBMITTER_ID namespace="SUB4952489">bp0</SUBMITTER_ID>
      </IDENTIFIERS>
    </STUDY_REF>
    <DESIGN>
      <DESIGN_DESCRIPTION>The protocol for immunoprecipitation of FLAG-tagged RocS was largely based on Minnen et al., Mol. Micro, 2011 and was performed in duplicate. Specifically, cells were pre-cultured in acid C+Y (pH 6.8) and grown until OD600 0.40. Cells were then diluted 1:50 in acid C+Y, to a final volume of 30 mL and grown until OD600 0.20. Fixation, formaldehyde quenching and harvesting was performed as described earlier. DynabeadsTM Protein G (Invitrogen) were prepared according to the manufacturers instructions and loaded with 10 ug of anti-FLAG antibody. Cell pellets were resuspended in 2 mL ice-cold lysis buffer and transferred to a 5 ml round-bottom tube. Samples were sonicated on ice for 5-10x 30 sec  on a Sonics Vibracell VCX130 with 65% amplitude. Samples were then split into 200 L whole-cell extract (WCE, stored at -20C) and 800 L for immunoprecipitation. Immunoprecipitation was performed as described before. WCE samples were thawed and combined with 300 L TES buffer and 20 L of 10% SDS. To elute DNA, both WCEs and immunoprecipitates (IPs) were incubated overnight on a shaker at 65C. On a magnet, the DNA-containing supernatant was transferred to a fresh tube.  DNA was purified by phenol-chloroform extraction, followed by ethanol precipitation.Further library preparation was performed by GATC Biotech. Due to an insufficient amount of material in one of the immunoprecipitation samples, we collected data on 2 WCE samples and 1 IP sample.</DESIGN_DESCRIPTION>
      <SAMPLE_DESCRIPTOR accession="SRS4181055">
        <IDENTIFIERS>
          <PRIMARY_ID>SRS4181055</PRIMARY_ID>
          <SUBMITTER_ID namespace="pda|jslager">FLAG-RocS</SUBMITTER_ID>
        </IDENTIFIERS>
      </SAMPLE_DESCRIPTOR>
      <LIBRARY_DESCRIPTOR>
        <LIBRARY_NAME>FLAG_1_WCE</LIBRARY_NAME>
        <LIBRARY_STRATEGY>ChIP-Seq</LIBRARY_STRATEGY>
        <LIBRARY_SOURCE>GENOMIC</LIBRARY_SOURCE>
        <LIBRARY_SELECTION>size fractionation</LIBRARY_SELECTION>
        <LIBRARY_LAYOUT>
          <SINGLE/>
        </LIBRARY_LAYOUT>
      </LIBRARY_DESCRIPTOR>
    </DESIGN>
    <PLATFORM>
      <ILLUMINA>
        <INSTRUMENT_MODEL>Illumina HiSeq 2500</INSTRUMENT_MODEL>
      </ILLUMINA>
    </PLATFORM>
  </EXPERIMENT>
</EXPERIMENT_SET>
